NOTE: RIGHT CLICK PANEL AND EMPTY AREA IN 2C STREAM TO BRING UP SETUP CAMERA DIALOG IF YOUR CAMERA IS NOT AUTOMATICALLY DETECTED.
YOU MUST GIVE IT A FEW MINUTES TO SETUP IN SYSTEM.
HTTP: feeds are another way to manually enter cameras if 2C Stream does not see or connect to the camera. If the camera is being seen on our left panel then right click the camera and choose Modify device. Enter Username and Password. Next right click camera again and Set login user. If the camera is still not viewable in a window when you drag the camera into a window then try manually entering HTTP camera streams. You can click the E url button in a window.
The best site to get the camera http feed information is here or https://www.ispyconnect.com/sources.aspx
* An example connection for a Samsung camera below. Translation of a Samsung Camera: http://username:password@IPAddress:/http link address
Some connections also need the port Example
AXIS HTTP EXAMPLE: http://admin:email@example.com/axis-cgi/mjpg/video.cgi
BOSCH HTTP EXAMPLE: http://admin:firstname.lastname@example.org/snap.jpg
SONY EXAMPLE: http://admin:email@example.com/en/index.html